What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 28.06.2025 00:15

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
It seems Mohan does not understand the difference between a comment and an Answer.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
‘Razor Blade Throat’ Symptoms As ‘Nimbus’ COVID-19 Variant Spreads - Forbes
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
For this case there are devices called Metal oxide varistors (MOV).
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Toyota Industries' shares nosedive on $33 billion buyout deal — steepest fall in 10 months - CNBC
so, what happens?
Upvotes:
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
3 Economic Events That Could Affect Your Portfolio This Week, June 16-20, 2025 - TipRanks
the problem then depends on "how fast does the fuse operate?".
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
The other is “what does a “fuse” do?”
Calvin Pickard Saved The Day - Defector
What is lightning?
This is 'the assistant's answer'
An AC voltage/ current source, and an ac inductive load.
2024–10–14 [Omar Gharbi Omar Gharbi ]
One is “what exactly is in a ‘surge protector’ ? ”
He then describes Rainy Season and Lightning.
Do all Koreans look like K-pop idols?
So, the voltage could go up to 500 volts, and the fuse will not open up.
He then asserts :
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
The No. 1 Supplement Causing Dangerous Liver Damage, Doctors Warn - bestlifeonline.com
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
This one hit behind the barn.
What does a fuse do?
At least they know the answer if they wanted it.
(Dc diagram shown, AC is similar).
[image of Common-mode choke]
There are three different concepts here that are getting confused.
but I think this circuit , shows a few more pieces.
Now when you have a certain ac resistance, then a current flows in a loop.
what exactly is a ‘surge’ protector?
This device then solves the entire problem.
But it can get overloaded, and no longer works.
A fuse is a non-resetable over current circuit protector.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
At one ohm, the resistor has a maximum of 1 watt power.
Aaron Rodgers says decision to sign with Steelers 'was best for my soul' - NFL.com
The MOV will conduct when the voltage exceeds 50% of line voltage.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
Because the load is inductive, the current lags the voltage.(by a bit).
First Sentence:
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
2024–10–16 [ OO OLAOYE OYEBODE ]
Nam eos consequatur amet quis qui dolorem optio.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
How can she get her mouth taped shut? She should not have freedom of speech.
These are simplified answers to the original question, and does not change anything I wrote above.
Barnstars:
There are two important concepts here.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
It also is a device that limits the change in current flow.
The third is lightning and “how it gets conducted into a home.”
Can the fuse protect the electronic devices from lightning instead of a surge protector.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
Edit 2024–10.
The bolt then partially travels down the line to your home.
This is where this question deviates from being a 'generic' question, and becomes more specific.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
Here is a simplified AC power diagram.
but this device (an Inductor) … impedes the rapid changes in the current.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
These devices are installed between the “hot” and “neutral” and protective ground.
I post the exact comment here.
But… the neutral is now “floating” because of the 1 ohm resistance.
nine
One
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
2024–10–10[John johnson John Johnson ]
This is where the MOV conducts again, and dissipated the energy.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
He then describes the function of a fuse.
A circuit breaker is similar, but is resettable.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
a photo is worth a thousand words.
In schematic diagrams this is the symbol for a fuse:
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
eight
[old diagram got deleted by accident]
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.